A multi-purpose bench for use at a table, the bottom of a bed or in an entry way. The rails and bottom of the legs are gently curved. The seat is made up of two separate pieces and angled towards the middle for comfort. Design by Daniel Chaffin.
Dimensions: 18”H, 15”W, 43”L
Price Guide: $950.00
The flowing hand sculpted curves of this Sam Maloof inspired low-back dining chair give this piece a very organic look and feel. All parts blend into one another with a mixture of hard and soft lines. The seat, back and arms are shaped to provide a level of comfort most would not think possible from a solid wood chair.
Materials: Walnut, Gaboon Ebony
Dimensions: 30”H, 25”W, 22L (seat height 18.5”)
Price Guide: $3,200.00 per chair
The Nadine Stool features legs which taper on two sides with round through tenons secured with walnut wedges. Stretcher rails on all for sides curve discreetly. The seat is woven Danish cord using the split rail weaving technique.
This design was awarded 4th place at the 42nd Annual Atalaya Arts & Crafts Festival at Huntington Beach, SC in 2017 along with 4th place with an honorable mention at the 2017 Fine Contemporary Craft Exhibition at Art Space, Raleigh, NC.
Materials: Ash, Danish Cord, Walnut
Dimensions: 18"H, 16"W, 25"L
Price Guide: $925.00
This classic rocking chair is inspired by Sam Maloof’s original design. Hand sculpted out of walnut with maple and ebony accents with a hand rubbed oil and wax finish.
Materials: Walnut, Gaboon Ebony, Hard Maple
Dimensions: 47.5”H, 47.5”W, 25.25”L
Price Guide: $5,300.00
Cherry bench with hand woven Danish cord seat. Almost all of the parts to this bench are curved or rounded in some way. It has both an Asian and contemporary feel to it. Design by Mark Edmundson.
Materials: Cherry, Danish Cord
Dimensions: 27”H, 16.5”W, 42”L, seat height 17.5”
Price Guide: $1,300.00
Mesquite slab top with stained poplar legs and rail. The rail is a bent lamination which mirrors the curve of the top.
Materials: Mesquite, Poplar
Dimensions: 29.5"H, 12"W, 44"L
Price Guide: $1,375.00
Walnut bench with a hand woven Danish cord seat. The arm rests are gently curved with softened edges. This bench was voted best contemporary piece in the 2014 Kerrville Furniture Makers Show, Kerrville, TX.
Materials: Walnut, Danish Cord
Dimensions: 27”H, 15”W, 43”L, seat height 17.5”
Price Guide: $1,450.00
This bench has a distinctly mid-century modern feel with clean elegant lines and hand woven seat. The legs incorporate a gentle taper which runs into a curve just beneath the rails which are wrapped with Danish cord.
Materials: Walnut, Danish Cord
Dimensions: 18”H, 16”W, 42”L
Price Guide: $1,050.00
A classic looking bar stool, the seat is coopered for comfort, with tapered legs and curved stretchers and a wide sturdy footprint. The stretcher joints are reinforced with brass pins for strength as well as visual effect. Design by David J. Marks
Materials: Cherry, Brass
Dimensions: 29.5”H, 15”W, 15”L
Price guide: $600.00
Curly maple and mahogany end tables. The curly maple top is cut around the gently tapered mahogany legs to let the leg stand slightly proud of the top. The edges of the top have a subtle curves that finish in the center of each leg. Design by Ray Finan.
Materials: Curly Maple, Sipo Mahogany
Dimensions: 25.5" H, 19.5"W, 19.5"L
Price Guide: $575.00 each
Contemporary king size platform bed has a light airy feeling to it due to the lack of any apparent support to the sides. The headboard is very gently curved back for comfort. The bed can be completely dismantled in a matter of minutes for transportation, and can be made either with or without the storage drawer at the base.
Materials: Sipo Mahogany
Dimensions: 41.5”H, 80.5”W, 85”L
Price Guide: $3,200.00
A truly unique concept, the Zoom Room system gives you that extra bed when you need it as well as a piece of useable furniture or storage space. When you need a bed just press the remote control and the bed transitions from behind the cabinetry, when not in use the bed and its mechanism is stored behind the custom cabinetry. This example shows a queen size bed with hanging space and drawer storage on the left and open fixed shelf storage to the centre and right. The center section could also be used to hang a flat screen TV. For more information on the Zoom Room system go to www.zoom-room.com.
Materials: Solid Ash Hardwood, Ash Veneer Plywood
Dimensions: 91.5”H, 24”W, 96”L
Price Guide: Dependent on size of bed and cabinetry requirements.
The main carcass of this piece is constructed from bamboo plywood with wenge for the legs, frame and laminated curved rails. Each door is inlayed with a strip of wenge with a hand-shaped wenge pull dovetailed into the top edge. This piece is utilized as an audio visual cabinet, but could have a number of other uses.
Materials: Bamboo plywood, Wenge
Dimensions: 22”H, 17”W, 62”L
Price guide: $4,200.00
A combination of solid cherry and cherry veneer with adjustable shelving.
Materials: Cherry, Cherry Veneer.
Dimensions: 71”H, 7.5”W, 80”L
This Daniel Chaffin design takes the traditional trestle and gives it a modern contemporary look. The long edges gently curve and are back bevelled which give a lightness to the top. The ends of the table are left straight and also back bevelled. The top stretcher rails are curved with tenons which go completely through the legs.
Dimensions: 28.5”H, 37”W, 69”L
Price guide: $3,600.00
This one of a kind dining table and benches are made from a live oak tree which grew in the client's own yard. The top maintains the tree's natural edge on both long edges. The leg design is a mitered frame which adds lightness to the overall piece. Finished in a clear satin lacquer to let the natural beauty of the live oak show through.
Materials: Live Oak
Dimensions: Table, 29”H, 51”W, 96”L
Dimensions: Benches, 18.25”H, 12.25”W, 84”L
Price guide: Price will vary with slab size and design.
An ideal gift for a family member or friend. Made from solid wood and finished with tung oil or Danish oil to bring out the natural beauty of the grain.
Dimensions: Custom made to order
Price Guide: From $125.00
This example is Texas harvested mesquite and pecan finished with Danish oil.
Dimensions: Custom made to order
Price Guide: From $250.00
Hand shaped bud vases have an inner glass container which is removable for cleaning. Made from solid hardwoods and finished with tung oil to bring out the natural beauty of the grain.
Dimensions: 8.5”H, 3.5”W, 3.5”L
Price: From $55.00
This is a classic Adams style fire surround. Made from Brazilian mahogany, with an applied molding and plinth boxes at the base of the columns.
Materials: Brazilian Mahogany
Dimensions: 48”H, 6”W, 52”L
Price guide: $1,800.00
The way the legs of this table curve in two directions gives the piece an elegant, graceful look. The top sits proud of the aprons to give a floating appearance. Replicated from a design by Don Kondra.
Materials: Walnut, Maple
Dimensions: 29.25”H, 13”W, 35”L
Price Guide: $1,250.00
End tables with a distinctly Danish/mid-century modern influence. Reinforced mitered frames and subtle shaping on the rails and stretchers give a clean elegant look. These photos show examples in white oak and walnut, but can be made in any wood of your choice.
Materials: White Oak, Walnut
Dimensions: 20”H, 18”W, 18”L
Price Guide: $475.00
Elegant and functional solid elm nesting tables. These tables incorporate wedged through tenons to secure the top to the legs.
Dimensions: 16.5”H, 13.75”W, 22.75”L (Largest table)
Price Guide: $1,800.00
Simple design and clean lines combined with the use of the beech give this end table a Scandinavian look and feel.
Materials: Beech, Beech Veneer
Dimensions: 22”H, 20”W, 20”L
Price guide: $375.00
The front and side rails of this bench are gently curved and flow into the legs which are chamfered on all four sides and softened to avoid hard edges. Upholstery which was carried out by Spruce of Austin, TX follows the curve of the rails. The lower support cross members are mortised into a chamfered section at the bottom of the legs.
Materials: Hard Maple
Dimensions: 17”H, 16”W 30”L
Price Guide: $975.00 (Not including upholstery)
This version of the Ruby entry/hall table features curved aprons which differ from the original version. The way the legs of this table curve in two directions gives the piece an elegant, graceful look. The top sits proud of the curved aprons to give a floating appearance. Based on a design by Don Kondra.
Materials: Mesquite, Ebonized Ash
Dimensions: 29”H, 13.25”W, 35.25”L
Price Guide: $1,250.00
Solid cherry media console cabinet with raised panel doors and end panels, adjustable shelves. Open center section with cable management and ventilation for electronics.
Dimensions: 28"H, 20"W, 52"L
Price Guide: $3,600.00